
A router lands on the living-room table, four laptops appear, and someone asks: how do we get everyone into one Counter-Strike match? The game has changed its name since 2018. The trick mostly has not.
The short answer: put every PC on the same network, enable the developer console, and either host a Practice match on one PC and have friends type connect plus your local IP, or install a proper dedicated server with SteamCMD and start it with sv_lan 1. The first takes five minutes. The second costs about 60 GB and an evening, and it is the one that behaves.
What changed since CS:GO
Counter-Strike: Global Offensive is gone from Steam. Counter-Strike 2 replaced it at the end of September 2023, free to everyone, on Valve's newer Source 2 engine. Your old skins and items carried forward, so nobody at the party lost a knife.
The Steam page still lists it as free to play, with Windows 10, 8 GB of RAM and 85 GB of disk as the minimum. That last number matters for a LAN party more than any other.
The old game is not entirely dead. Right-click Counter-Strike 2 in Steam, open Properties, then Betas, and pick csgo_legacy. GGRecon's January 2024 guide puts that download at about 12.55 GB: online matchmaking is off, offline bot modes still work. For a nostalgia LAN, that is enough.
Before anyone arrives: the checklist
- One network, ideally one cable each. Everyone joins the same router, by Ethernet if you can; a crowded living room's Wi-Fi is where lag lives. If your router is ancient, this is what a new one buys you.
- Everyone logs into Steam first. Profilerr's offline guide is blunt: CS2 will not launch unless a Steam account is signed in. If the internet drops later, Steam shows an "Unable to Sync" message and a "Play anyway" button, which works without your inventory.
- Install the game before the party, not during it. Steam's Local Network Game Transfers, launched in February 2023, copy an installed game from one PC to another over the LAN; Valve named LAN parties as a reason it exists. In Steam's Downloads settings the sharing option defaults to your own devices, so switch it to friends or everyone on the PC that already has CS2.
- Turn on the console on every PC. Settings, then Game, then set Enable Developer Console to Yes. It opens with the ~ key, left of the 1, with no restart.
- Let CS2 through the firewall. Microsoft's advice is to allow the app rather than open a port: Windows Security, Firewall & network protection, Allow an app through firewall. Never switch the firewall off.
Route 1: host from one PC
The 2018 method, still alive. On the strongest PC, open Play, choose Practice, pick a map and mode, and start. In the console type status; the output includes the server's local address, something like 192.168.1.2:27015. Everyone else types connect followed by that address. When sides are picked, the host runs mp_restartgame 1.
| Command | What it does | Source |
|---|---|---|
| status | Prints the map, the players and the server's IP | Total CS |
| connect 192.168.x.x:27015 | Joins the host at that address | Profilerr |
| bot_kick all | Removes bots; T, CT or a difficulty also work | Total CS |
| mp_restartgame 1 | Restarts the match after one second | Total CS |
| sv_lan 1 | LAN mode: no heartbeat, no Steam authentication; off by default | Total CS |
When CS2 launched, a Steam forum thread filled with players whose friends hit a black screen and a networking error joining a private match; the original poster later noted Valve fixed practice matches with friends. If Route 1 misbehaves on the night, Route 2 is the fix. The in-game Private Matchmaking tab is a fallback: set the lobby to Open Party and share the code, though that needs the internet.
Route 2: a real dedicated server
A dedicated server is CS2 running without the game part, on any PC in the room. Hetzner's CS2 server tutorial walks through it on Linux: about 60 GB of files, with 4 CPU cores, 8 GB of RAM and 80 GB of disk as the floor.
The install is one SteamCMD line: +login anonymous +app_update 730 validate. The launch line is the interesting bit: -dedicated, +map de_dust2, -port 27015, and +sv_lan 1 for LAN-only play. Players connect with the same connect command as before, aimed at the server PC. Open 27015 on UDP and TCP on that machine; the tutorial lists more ports, and says not all are needed for a private server.
When it will not connect
Usually it is the network, not the game. Profilerr's checklist starts with a ping: open Command Prompt on a guest PC and ping the host's address. Repeated "Request timed out" lines mean the two PCs are not really on the same network, often because one is on the guest Wi-Fi or a phone hotspot.
Next suspect is the host's firewall, then a wrong port after the colon. Last, check everyone has the same build: a PC that sat in a cupboard since the last party will want its patch first.
Frequently asked questions
Do I need a token or a paid host to play on a LAN?
No. Hetzner's tutorial is precise about the Game Server Login Token: without one, your server will not appear in the public server browser. Friends typing an IP never open that browser. A spare PC with sv_lan 1, or a Practice match on the host's own PC, needs neither a token nor a hosting bill.
Can we play with no internet at all?
Mostly. Every PC must have signed into Steam at least once, and CS2 prompts you to "Play anyway" when it cannot sync. You lose inventory skins and any rewards for the session. The match itself runs fine over the local cable.
Do the checklist the afternoon before, especially the 85 GB installs. The evening is then just status, connect, and arguing over the good chair.
Conversation
Have a question or correction? Contact Rvasus.