
Updated October 2026. This page began in 2018 as a first look at the then-new Raspberry Pi 3 Model B+. Both boards are still made and sold, so the comparison still matters, but the question has changed. It is no longer "B or B+"; it is "B+, Zero 2 W or Pi 5". The specification table comes first, then the buying advice.
The short answer: between the two, buy the B+. It costs the same, runs a little faster, has faster wired and wireless networking and can take power over Ethernet. If you are starting a new project rather than replacing a board, a Raspberry Pi Zero 2 W or a Pi 5 is usually the better fit.
Raspberry Pi 3 B and 3 B+: the differences that matter
| Feature | Pi 3 Model B (2016) | Pi 3 Model B+ (2018) |
|---|---|---|
| Processor | Broadcom BCM2837, four cores at 1.2 GHz | BCM2837B0, four cores at 1.4 GHz, metal-capped for better heat spreading |
| Memory | 1 GB | 1 GB |
| Wired network | 100 Mbps | Gigabit port over USB 2.0, about 300 Mbps in practice |
| Wi-Fi | 2.4 GHz only | 2.4 and 5 GHz, with Bluetooth 4.2 |
| Power over Ethernet | No | Yes, with the separate PoE HAT |
| Power input | Micro-USB, 5 V at 2.5 A | Micro-USB, 5 V at 2.5 A |
| Price | $35 | $35 |
Two of these rows are easy to misread. The B+ has a gigabit Ethernet jack, but it hangs off a USB 2.0 hub, so real transfers top out around 300 Mbps. And the 1.4 GHz clock is only about 17% higher than the B's 1.2 GHz; the metal lid on the processor matters as much, because the older board throttled under sustained load.
The full specifications are on the Model B+ product page and the Model B product page. The 2018 launch coverage from RS DesignSpark is still the best account of why the board was redesigned.
Which Raspberry Pi to buy in 2026
| Board | Price | Buy it for |
|---|---|---|
| Pi Zero 2 W | $15 | Sensors, cameras, small servers and anything battery-powered. Same processor family as the Pi 3, in a tiny board. |
| Pi 3 Model B+ | $35 | Replacing a Pi 3 in a project that already works, or a case and HAT that fit only the Pi 3 layout. |
| Pi 4 Model B | from $35 | Projects that need real gigabit networking, USB 3.0 or more than 1 GB of memory on a budget. |
| Pi 5 | from $50 | Desktop use, media servers, network storage and anything that felt slow on a Pi 4. |
The Pi 3 B+ is not a bad board. It is a board whose two reasons to exist, "cheap" and "small", are now served better by the Zero 2 W, while its "fast enough for a desktop" claim is now served by the Pi 5.
Powering a Pi 3 the right way
The Pi 3 boards take 5 volts through a micro-USB socket and want up to 2.5 amps. They do not speak USB Power Delivery, so a modern laptop charger will give them only its 5 V basic rate, which on many bricks is 3 A and fine, but on some is 1.5 A and not. If the small lightning-bolt icon appears on screen, the supply is sagging.
Use the official 5 V 2.5 A supply or a charger whose label states 5 V at 2.5 A or more, with a short, thick cable. Our guide to the new EU charger label explains how to read those ratings. The Pi 5 is different: it uses USB-C and wants a 5 V 5 A supply for full USB power.
Installing an operating system today
The 2018 article used NOOBS, which is gone. Today you download Raspberry Pi Imager, choose the board model and an operating system, and write it to a microSD card. Raspberry Pi OS still supports the Pi 3 family. A fast card matters more than the clock difference between the B and the B+.
Frequently asked questions
Can I swap a Pi 3 B for a B+ in an existing project?
Yes. The layout, connectors and 40-pin header are the same, so cases and HATs fit. Update the operating system before swapping, since the B+ needs firmware from March 2018 or later.
Does the B+ run hot?
Less than the B under load, thanks to the metal-capped processor, but it still benefits from a small heatsink in a closed case.
Is 1 GB of memory enough in 2026?
For a sensor hub, a print server, a retro-games box or a Pi-hole, yes. For a web browser or anything with a desktop, no; that is Pi 4 or Pi 5 territory.
Conversation
Have a question or correction? Contact Rvasus.